Removing Ties; An Example Of Removing Ties From An Existing Set Of Video Or Audio Ties - Extron electronics SMX Series User Manual

3.
To view the input tied to it, press any of the unlit output buttons (in the example
below, buttons 10 though 12, and 16). The untied output buttons extinguish, and
the previously tied output buttons (10 though 12 and 16), and the associated tied
input button (#3) show the appropriate color (see figure 3-6)
Step 2.
Press plane button #3 (lights red - audio plane).
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Untied output buttons light, indicating signal type: red (audio).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Step 3.
Press a tied output button (#10).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Tied outputs (#10 through 12, and 16) and associated input (#3) light
the same color.
Figure 3-6 — Viewing ties — an example of tied outputs
N To clear the lights after viewing, press the Esc button. This does not clear or
change any existing ties.

Removing ties

Any video or audio tie can be removed from an existing set of ties.

An example of removing ties from an existing set of video or audio ties

In this example, Input #3 on video plane #0 is already tied to output #'s 2, 4, 6,
and 7. The ties to outputs #4 and #7 are to be removed.
1. Press and release plane button #0 (lights green). Input button #1 lights the
plane signal type: green for video, red for audio, amber for video and audio.
2. Press and release Input button #3 (lights). Tied outputs (#'s 2, 4, 6, and 7) light
the same color as the input button. Input #1 extinguishes (see figure 3-7).
Step 1.
Press plane button #0 (lights green).
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Input button #1 lights, indicating signal type: green (video) or red (audio).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Step 2.
Press Input #3 button (lights).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Tied outputs (# 2, 4, 6, and 7) light same color, and Input #1 extinguishes.
Figure 3-7 — Removing ties - an example; steps 1 and 2
3. Press and release outputs buttons # 4 and 7. They begin blinking (indicates
ready for removal), and the Enter blinks green.
SMX System MultiMatrix Switchers • Operation and Setup
I/O PLANE SELECT
INPUTS
OUTPUTS
INPUTS
OUTPUTS
I/O PLANE SELECT
INPUTS
OUTPUTS
INPUTS
OUTPUTS
3-7