Example 3: Removing A Tie From A Set Of Video And Audio Ties - Extron electronics CrossPoint 300 Series User Manual

im Vertrieb von

Example 3: Removing a tie from a set of video and audio ties

Press and release the Input 5 button.
The LED lights.
2 3 4
www.camboard.de
CAMBOARD Electronics
The following steps show an example in which an existing audio tie is removed
from the current configuration. The steps show the front panel indications that
result from your action.
This example assumes that you have performed example 1 and example 2.
1. Press and release the Esc button (figure 3-16).
Press the Esc button to clear all selections.
CONTROL
ENTER PRESET VIEW
= Blink once
The LED blinks once.
1
Figure 3-16 — Clear all selections
2. To select audio only for the tie, if necessary, press and release the RGBHV
button and/or Audio button (figure 3-17).
Press the RGBHV button to toggle on and off.
The LED is unlit when deselected.
Figure 3-17 — Select audio only
3. Press and release the input 5 button (figure 3-18).
INPUTS
5 6 7
1
Figure 3-18 — Select an input
Tel. 07131 911201
CrossPoint 300 Matrix Switchers • Operation
Fax 07131 911203
1
ESC
I/O
RGBHV AUDIO
Press the Audio button to toggle on and off.
The LED lights when selected.
The Output 3, Output 4, and Output 8 LEDs light to indicate
the audio ties created in example 1.
The output 1 LED does not light to indicate the tie created
in example 2 because that tie is RGBHV only.
2 3 4
OUTPUTS
ce-info@camboard.de
5 6 7 8
3-13