Command/Response Table For Ip Sis Commands (Continued) - Extron electronics SMX Series User Manual

Command/response table for IP SIS commands (continued)

Command
Set verbose mode
N The SMX can send out unsolicited information (such as a notice of a change in input or some other setting). This is
a verbose (wordy) relationship between the switcher and a connected device. For a direct RS-232/422 connection, the
SMX is set for verbose mode by default. When the SMX is connected via Ethernet, verbose mode is disabled by default
in order to reduce the amount of communication traffic on the network. If you want to use verbose mode with a switcher
connected via Ethernet, you must set this mode to On each time you reconnect to the SMX.
View verbose mode
Where: 0 = neither verbose mode nor tagged responses enabled, 1 = verbose mode enabled; no tagged responses (default)
2 = tagged responses enabled - verbose mode not enabled, 3 = both verbose mode and tagged responses enabled
Set mail server IP,
unit domain name
N Password is optional. If no password is being used, type
Read mail server IP,
domain name
Set e-mail recipient
Read e-mail recipient
Set E-mail events for
recipient
Example:
View E-mail events for
recipient
X5^
= IP/Gateway address: ###.###.###.### (server IP address)
N
X5&
= E-mail domain name (e.g extron.com)
X6#
= Verbose mode: 0 = Clear/none (default for Telnet connection): 1 = Verbose mode (default for RS-232/
RS-422 connection), 2 = Tagged responses for queries, 3 = Verbose mode and tagged for queries
X7$
= Password: 12 digits, alphanumeric, user, admin.
X8!
= E-mail recipient address
X8@
= E-mail Account, 65 to 72
X8#
= Notification Selection 1, I (inputs), F (fans), P (power supply)
X8$
= Notification Selection 2; If X8# = I then X8$ = 00 (all inputs), or 1 to 16, If X8# = F then X8$ = 00 (both fans),
or 01 (fan 1), or 02 (fan 2), If X8# = P then X8$ = 00 (both power supplies), or 01 (PS 1), or 02 (PS 2)
X8%
= Notify when ? 0 = No response, 1 = Fail/Missing, 2 = Fixed/Restored, 3 = Both 1 and 2, 4 = suspend,
5 = Un-suspend.
X9)
= Slot address, 00 (for F and P), 01 to 10 (for I)
ASCII command
(host to switcher)
E X6# }
CV
E }
CV
EX5^ , X5& , X7$ X7$ }
, CM
E }
CM
EX8@ , X8! }
CR
EX8@ }
CR
EX8#X8@ X9) X8$ X8% }
, , , EM
E }
I65,02,00,2EM
EX8#X8@ X9) X8$ }
, , EM
SMX System Multimatrix Switcher • Programmer's Guide
Response Additional
description
(switcher to host)
X6#]
Enable or disable verbose
Vrb
mode and/or tagged
responses, where additional
information is provided in
response to a query.
X6#]
Show verbose mode/tagged
response status
] X7$
X5^ , X5& , X7$ X7$
Ipm• , ,
user, admin)
EX5^ , X5& ]
.
CM
X5^ , X5& , X7$ X7$ ]
, ,
X8@ , X8! , ]
Ipr
X8! , ]
Show e-mail recipient
address
X8! X8# X8@ X8$ X8%...X8%]
Ipe , * *
]
02IpeI65*00*2222222222222222
X8%X8%X8% X8%]
...
X6#
:
= Password(12 digits,
X8!
.
4-21