Date/Time Settings Fields - Extron electronics SMX Series User Manual

Date/Time Settings fields

The Date/Time Settings fields (figure 6-6) provide a location for viewing and
setting the time functions.
Figure 6–6 — Date/Time Settings fields
Change the date and time settings as follows:
1. Click the desired variable's drop box. The adjustable variables are month,
day, year, hours, minutes, AM/PM, and (time) zone. A drop-down scroll box
appears (the month drop box is selected in figure 6-6).
2. Click and drag the slider or click the scroll up
desired variable is visible.
3. Click on the desired variable.
N If setting the time, set the local time. The Zone variable allows you to then enter
the offset from Greenwich Mean Time (GMT).
N The Zone field identifies the standard time zone that has been selected and
displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate Daylight Saving radio button. To turn off daylight
savings time, select Off.
N When daylight savings time is enabled, the switcher updates its internal clock
between Standard Time and Daylight Savings Time in the spring and fall on the
date that the time change occurs in the United States of America and parts of
Europe and Brazil. When daylight savings time is turned off, the switcher does
not adjust its time reference.
6. Click the Submit button at the bottom of the Date/Time Settings section to
implement your selections.
SMX System MultiMatrix Switchers • HTML Operation
or down buttons until the
6-7