Table of Contents
Advertisement
HTML Operation, cont'd
Saving the current configuration as a plane preset
1.
1.
N All unassigned buttons become active. The global preset field grays out.
2.
3.
N Preset names are limited to 12 characters. Valid characters are 0 – 9, a – z,
4.
If you do not rename an unassigned button, the SMX names the preset as Preset nn
(where nn corresponds to the next plane number).
If you do not rename an existing preset when it is overwritten, the SMX retains the
same name.
Recalling a plane preset
To recall a plane preset to be the current configuration, on the Plane Presets page,
select the relevant plane, then click the button for the desired preset.
Special Characters
The HTML language reserves certain characters for specific functions. The SMX
does not accept these characters as part of preset names, the switcher's name,
passwords, or locally created file names.
The SMX rejects the following characters:
+ ~ , @ = ' [ ] { } < > ' " ; (semicolon) : (colon) | \ ? and space.
6-20
SMX System MultiMatrix Switchers • HTML Operation
In the Plane preset field, click the plane drop down box, and select the
relevant plane.
Click Save Preset. The button changes to Select Preset..., and grays out.
Select the desired preset by clicking one of the preset buttons.
•
To create a new preset, click one of the [unassigned] buttons.
•
To overwrite an existing preset, click its button.
Enter a name for the preset in the text field.
A – Z, and special characters _ : = / and space.
The following characters are invalid in preset names: + ~ , @ = ' [ ] { } <
> ' " ; : | \ and ?.
Click Accept.
Advertisement
Table of Contents
