Removing a Tie from a Set of Ties
To undo an existing I/O tie:
1.
Press and release the
2.
Press the
Video
Press I/O button to
select audio or video.
Figure 14.
3.
Press the input button whose tie you want to break. The input button LED and its tied
output button LEDs light red (audio) or green (video), depending on your selection in
step 2 and on the types of ties the selected input currently has.
Figure 15 shows an example of selecting an audio-only tie to break.
Press and release an Input button.
The LED lights to indicate whether audio or
video was selected for the input.
Figure 15.
4.
Press the desired output button whose LED is lit. The selected output button LED and
the
Enter
Press the Output button for the tie to be broken.
The LED starts to blink.
1
5
Figure 16.
5.
Press the
become unlit, and the tie is broken.
button to clear any previous selections.
Esc
button repeatedly to select the type of tie you want to break (green for
I/O
, red for
).
Audio
VIDEO
I/O
Lights green when video is selected.
I/O
AUDIO
Lights red when audio is selected.
Selecting Audio or Video using the I/O Button
INPUTS
1
2
3
5
6
7
Selecting an Input
button LED start to blink, indicating a change is pending.
OUTPUTS
2
3
4
6
7
8
Selecting the Output to Untie
button. The selected input and output LEDs and the
Enter
The LEDs for any outputs already tied to the selected input
light to indicate the existing video ties (audio in this example).
1
4
8
5
ENTER
The Enter button LED blinks green,
indicating the need to confirm the
change.
DXP HD 4K PLUS Series • Operation
OUTPUTS
2
3
4
6
7
8
button
Enter
20