Control Pages; User Control Page; To Set Or Replace Ties - Extron electronics SMX Series User Manual

HTML Operation, cont'd

Control Pages

These two Control pages (User Control and Presets) allow limited device
configuration. From the User Control page, the setting and viewing of
input-to-output ties, viewing and adjustment of input audio levels, output volume
levels, and muting status, and the configuring and saving of EDID data is possible,
across all allocated plane addresses. The Preset page allows Global and Plane
presets to be saved and recalled. The Control pages open on the User Control page.

User Control page

The User Control page emulates some of the front panel features and displays the
current input-to-output ties, input audio level, output volume, A/V mute status,
and current EDID settings (see figure 6-13). See chapter 3, "Operation and Setup,"
for descriptions of the settings on this page.

To set or replace ties

1.
N When selecting a plane, only the available adjustment fields will show on the
Figure 6-13 — Control pages — User Control page
2.
N When viewing the ties on the User Control page, video ties are shown green,
3.
N An existing tie to an input is replaced in favor of the new input tie.
4.
6-14 SMX System MultiMatrix Switchers • HTML Operation
Select the desired plane from the drop down box (see figure 6-13).
screen, according to the output board type installed and addressed.
1 2
3
In the signal type field, click Video only, Audio only, or Video & Audio
depending on the signal type to be tied.
audio ties are red, and video and audio ties amber (see figure 6-13).
Click the desired input/output button in the Set & View Ties map. The button
changes color according to signal type and indicates a provisional tie with a
letter "P" (see figure 6-13, input #6, output #7, for example).
Click Cancel to abandon changes and revert back to the existing ties.
Click Take to make the ties. The page refreshes, the letter "P" disappears from
the button and the SMX is updated with the new tie.