Table of Contents
Advertisement
Operation, cont'd
Figure 3-13 — Select the output
5.
Figure 3-14 — Press the Enter button
Figure 3-15 — Example 2, final configuration
Example 3: Removing a tie from a set of video and audio ties
The following steps show an example in which an existing audio tie is removed
from the current configuration. The steps show the front panel indications that
result from your action.
3-12
CrossPoint 300 Matrix Switchers • Operation
Press and release the Output 1 button.
The LED blinks to indicate that the selected
RGBHV input will be tied to this output.
1
2
3
4
OUTPUTS
Press and release the Enter button (figure 3-14).
Press the Enter button to confirm
the configuration change.
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
ENTER
The current configuration (figure 3-15) is now:
•
Input 5 video tied to output 1, output 3, output 4, and output 8
•
Input 5 audio tied to output 3, output 4, and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3, 4, and 8.
Input
5
1
3
Output
4
8
The Enter LED blinks to indicate
the need to confirm the change.
5
6
ENTER PRESET
Video
Audio
Advertisement
Table of Contents
