Audio-Input-Config - Extron electronics SMX Series User Manual

SMX Control Software, cont'd
• Name Presets — Select this to assign or edit preset names.
• RS-232 Strings — Select this to view the current RS-232 programming strings.
• Initialize... — Select this for choices when re-setting the SMX to factory

Audio-input-Config

N
Upon selection of this menu, one window (Configure Audio Options) opens.
• Configure Audio Options — Opening this window allows the user to set
SMX System MultiMatrix Switchers • SMX Control Software
5-12
Click on the radio button to select the function (Ties, Audio, or RGB Delay).
Click Print to produce a hard copy of the settings
Click Close to exit the window.
defaults. Select the setting(s) to be reset.
Menu title is grayed-out until an audio plane is selected.
the dB gain per audio input.
Click on the applicable "Changes" radio buttons to have the changes either
Immediate or verifiable.
Verify (default setting) allows accepting the changes via a "Take" button.
Immediate removes the Take button from the window and all changes are
made on the fly.
In the window, click on an input's up or down arrow repeatedly until the
gain value is visible (range is -18 to 24 dB, default 0db), then click Take. The
dB value is red (pending) before, and green (previous) or black (current) after
clicking Take. If default values (0dB) are desired, click Use Defaults.