Example.3:.Removing.a.tie.from.a.set.of.video.and.audio.ties - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd
Example 3: Removing a tie from a set of video and audio ties
In the following example, an existing audio tie is removed from the current
configuration. The steps show the front panel indications that result from your
action.
N This example assumes that you have performed example 1 and example 2.
1.
Figure 3-17 — Clear all selections
2.
Figure 3-18 — Select audio only
3.
Figure 3-19 — Select an input
3-18 CrossPoint / MAV Matrix Switchers • Operation
Press and release the Esc button (figure 3-17).
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
To select audio only for the tie, if necessary, press and release the RGBHV
(CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio
button (figure 3-18).
Press the RGBHV/Videobutton to toggle on and off.
The button is unlit or background illuminated
when deselected.
Press and release the input 5 button (figure 3-19).
Press and release the Input 5 button.
The button lights red (matrix sizes up to 1616)
or green (matrix sizes 2412 through 3232).
1 2 3 4 5
17 18 19 20 21 22 23 24 32
The Output 3, Output 4, and Output 8 buttons light red to
indicate the audio ties created in example 1.
1 2 3 4 5
17 18 19 20 21 22 23 24 32
The Output 1 button does not light to indicate the tie created
in example 2 because that tie is RGBHV or video only.
I / O
RGBHV AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
I
6 7 8 16
N
P
U
T
S
O
6 7 8 16
U
T
P
U
T
S