Master-Reset - Extron electronics SMX Series User Manual

SMX Control Software, cont'd
• Ties as Lines — Selecting this displays input to output ties as lines.
•
• Frquency-read options — Selecting this displays a sub-menu with
N When "Frequency-read options" setting is "None", then "Tools, View Input
• Icons in I/O Boxes — Select this to reserve the choice of showing
• Numbers in I/O boxes — Select this to have the input/output number
• Catch FPC/other's changes — Select this to have the switcher report all

Master-Reset

Select this menu only if a master reset is desired. This opens a warning window
stating the consequences of this action. Click No if the reset is not required.
Click Yes to proceed and complete the reset.
SMX System MultiMatrix Switchers • SMX Control Software
5-14
Ties as Crosspoints — Selecting this displays input to output ties as points.
LInes Crosspoints
Ties are shown as a matrix, and ties that have been made are indicated as
green boxes. Ties that will take effect when you click the Take button are
indicated by + in the crosspoint box. Ties that will be broken when you click
the Take button are indicated by –.
3 selectable items; Automatically every 10 seconds, On Demand (or by
Refresh), and None. Select the input read and update frequency as desired.
Frequencies" is grayed out and not available.
user-assigned icons, or in sequential. See the "Customizing the SMX
window" section, earlier in this chapter.
displayed in the boxes.
configuration and setting changes via the Remote RS-232/RS-422 or Ethernet
connection. These reports allow the SMX Control Program to track the
changes that occur in the switcher's configuration and settings, whether
commanded via the front panel, the RS-232/RS-422 port, or the Ethernet port.