Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
20
803528-13
Removing the s ring
Info
The operations are the same on both fork legs.
201722-11
-
Remove lock ring@.
Info
The lock ring has a beveled end where a screwdriver
can be applied.
-
Warm up the outer tube in area
ing.
Guideline
1
so
c
(122 °F)
0
-
Pull the outer tube from the inner tube with a jerk.
Info
Lower sliding bushing @ must be pulled from its
bearing seat.
-
Remove upper sliding bushing
Info
Without using a tool, pull the stack slightly apart by
hand.
-
Take off lower sliding bushing @.
-
Take off support ring Ci).
48.
-
Take off seal ring
-
Take off lock ring@.
-
Take off dust boot (D.
-
Unclamp the fork leg.
Preparatory work
-
Disassemble the fork legs.
Main work
-
Pull the spring downward. Mount the open end wrench on
the hexagonal part.
Cs,
of the lower sliding bush
@).
(�
p. 18)
Advertisement
Table of Contents
