Table of Contents
Advertisement
The mode operates the unit continuously at a fixed temperature. Operation at the set
temperature continues until operation is stopped.
SV
▲
Temp. set→START
Setting fixed temperature operation
1 Turn power on
2 Setting to the fixed temperature
operation mode
3 Setting a temperature
4. Operating procedures
▲
ｔ
POWER key
STOP key
SV：Set temperature t：Time
Turn the ELB at the upper right side of the unit "ON".
Keeping the
on.
Main display shows the internal temperature and the
Sub display shows the set temperature.
Press the
operation lamp on.
※ When you use the unit for the first time, fixed
temperature
Otherwise, the operation mode you selected in the
last session will be selected.
① Press the
will flash in the Sub display.
② Move the flashing indication using the
then change the value with the ▲▼ keys.
Setting range：-5.0～65.0℃（available range:0～
60℃）
③ When setting of the temperature has completed,
decide on it with the ENTER key.
Press the Esc key if you want to cancel during setting.
18
Fixed temperature operation
key pressed longer will turn power
key to turn the fixed temperature
operation
has
key. The numeric value to change
been
selected.
key and
Advertisement
Table of Contents
