Frost may tend to form on the evaporator in the unit depending on the specific conditions
during operation. Regularly check for frosting through the observation window at the
back inside the unit and perform defrosting (removal of frost) if a lot of frost is found. If
frequent defrosting is necessary, separately set the auto defrost function. P16 Setting
auto defrost)
Note: See "P4 3.Precautions for defrosting".
Performing manual defrost during
operation
1 Turning power OFF
2 Entering the password
4. Operating procedures
Pressing the
[M-dEF] in the Sub display and pressing the
starts five-minute manual defrost. During defrosting, the
Sub display shows [dEF-M] and ordinary operation
resumes when defrosting is completed.
* Press the Esc key if you stop defrosting in the middle
of it.
The function is enabled in the continuous and the
cycle operation modes of the refrigerator.
Keeping the
key pressed longer will turn power
OFF.
①
If you keep the
display shows [UPASS] and the Main display shows
a screen for entering two-digit numeric values.
Use the ▼▲ keys to enter the password "11" and
②
decide on it with the
30
Manual defrost
key during operation indicates
Setting the key lock mode
key pressed longer, the Sub
key.
key