Table of Contents
Advertisement
Starting/stopping operation
4
4. Operating procedures
Example 1 Start time setting
Press the
key and operation will start at set
START
temperature of 20℃ after 2hr 30min.
TIME
Example 2 Start setting on the clock
Press the
key and operation will start at set
START
temperature of 20℃ at 3:00p.m.
CLOCK
④ Use
to enter the operation start wait status.
⑤ The lamp flashes during operation and the set time
or clock time is displayed on the Sub display.
TIME
※Main display shows the internal temperature and the
Sub display shows the set TIME/CLOCK. When TIME
is selected, counting down of the set time will start.
⑥ To stop operation, use the
stop it.
※ You can check the set temperature with the
during operation.
Caution
You cannot resume operation of the refrigerator for
three
minutes
stopped. In this case, it enters the standby mode and
the "REFRIGERATOR" lamp flashes.
23
Auto start operation
key to manually
immediately
after
its
key
operation
Advertisement
Table of Contents
