Table of Contents
Advertisement
You can start operation automatically with the timer in this operation mode. Note that operation
will not stop automatically and you need to stop operation manually.
Timer start
Setting the auto start operation
1 Turning power on
2 Setting to the auto start mode
3 Setting
the
operation
wait
start time
Operation start(auto)
Turn the ELB at the upper right side of the unit "ON".
Keeping the
Main display shows the internal temperature and the
Sub display shows the set temperature.
Press the
operation/auto stop on.
※ When you use the unit for the first time, fixed
temperature operation has been selected. Otherwise,
the operation mode you selected in the last session will
be selected.
temperature
&
① Press the
time/operation
② Set time(setting range:0 ～ 99hr:59min) or clock
③ Set temperature in Sub display and then press
4. Operating procedures
key pressed longer will turn power on.
key to turn the lamp for fixed temperature
key, select the method to stop from
TIME/CLOCK with the ▲▼ keys and then press
the
key.
(24-hour format) in the Main display and then press
the
key.
the
key.
22
Auto start operation
ｔ
Advertisement
Table of Contents
