Setting The Recovery Mode - Yamato INE800 Manual

3 Setting the key lock
This section describes operations after recover from a power outage
1 Turning power OFF
2 Entering the password
3 Setting recovery from a power
outage
4. Operating procedures
① When the Sub display shows [KLoCK], decide on it
with the key.
② Use the ▲▼ keys to select a key lock type and
decide on it with the
:Key lock function OFF (setting on shipping)
:Operations other than the
keys are disabled.
:Only the
:
Only the
③ Keeping the
to the ordinary screen.
Keeping the key pressed longer will turn power
OFF.
①
If you keep the
display shows [UPASS] and the Main display shows
a screen for entering two-digit numeric values.
Use the ▼▲ keys to enter the password "11" and
②
decide on it with the
① Press the
key to display [RECoV] in the Sub
display and then press the
② Select an operation after recover and decide on it
with the key.
Cnt：The state before power outage continues after
recover from the outage.
（factory setting）
StoP ： The unit stops after recover from power
outage.
③ Keeping the
key pressed longer will return you
to the ordinary screen.
31
Setting the key lock mode
key.
and the START
key is disabled.
key is disabled.
key pressed longer will return you

Setting the recovery mode

Key pressed longer, the Sub
key.
key.