Yamato INE800 Manual page 48

4.8 Communication error codes
Communication error codes are as follows.
Error code
Function code error
01H
When a function code other than those defined is received.
Relative number (Reference #) error
02H
When the starting or setting number received is the one not defined.
Incorrect number of data pieces
・ When the number of pieces exceeds the specified number for data to be
03H
・ When the requested number is 0(zero).
・ When the number of pieces of received data does not match with the actual
Outside the setting range
11H
When a value set is outside the setting range defined in the reference table.
12H This code is not available for setting.
transmitted to the received message.
number of data pieces.
4. Operating procedures
Setting external communication
Description
44