Fixed Temperature Operation - Yamato IN602CS Instruction Manual

Fixed Temperature Operation

Start the operation from turning on the power shown in the figure, and continue the operation under the
setting temperature unless turning off the power.
SV
START
Setting of the Fixed Temperature Operation
1 Turn on the power
FIXED TEMP
AUTO STOP
AUTO START
PROGRAM
STANDBY
END
HEATER
FUNCTION PROGRAM
REFRIGE
2 Select operation mode
FIXED TEMP
AUTO STOP
AUTO START
PROGRAM
STANDBY
END
HEATER
FUNCTION PROGRAM
REFRIGE
▲
POWER
Standby
℃
2002/01/01 12:00
TROUBLE
MENU ENTER
CANCEL
MENU
Fixed TEMP OPR
℃
Select OPR mode
TROUBLE
MENU ENTER CANCEL
t
▲
STOP
• Turn on the power switch of the unit (earth leakage
breaker). Pressing the POWER key turns on the
power. The
temperature in furnace.
indicates "Standby" and the STANDBY lamp lights
on. (Hereafter, this state is called the "standby
state".)
DEFROST
POWER
① Pressing the MENU key displays the operation
mode selection screen.
② The Sub Display on the operation mode selection
screen displays the name of operation mode
currently selected
corresponding operation mode lamp blinks at the
same time.
③ Keep pressing the MENU key until the fixed
DEFROST
temperature operation mode is displayed.
④ Press the ENTER key.
POWER
operation mode is decided.
The fixed temperature operation is selected at the
initial setting of unit. The operation mode carried
out last is selected in case other than it.
15
Operation Method
SV: Setting temperature
t: Time
Main Display indicates
The Sub Display
with blinking.
The fixed temperature
the
The