Table of Contents
Advertisement
3 Setting the year and month/day
TIME
4 Setting the clock (24-hour format)
TIME
1 Setting a buzzer sound pattern
4. Operating procedures
Follow the procedures below to set the date and the clock.
① The TIME lamp flashes and the screen for the year
and month/date appears.
② Press the
key.
③ Set the western calendar year using the ▲▼ keys
and then press the
④ Set the month/day using the ▲ ▼ keys and then
press the
key.
※You can move the setting position to the left using
the
key.
① Press the
key.
② Press the ENTER key, set the time using the ▲▼
keys and then decide on it using the
Enter the time in the 24-hour format.
※
You can move the setting position to the left using
the
key.
③ After completing the setting, press the Esc key twice
to return to the initial screen.
Setting a buzzer sound pattern
① As in the clock setting, use the
display Sub display [bUZZ] in the Sub display and then
press the
key.
② Select from three buzzer sound patters using the ▲▼
keys and decide on it with the
on:
All operation sounds will be enabled (initial
setting).
CLK: Click sound only is disabled.
(Sound of the POWER key or other determining
operation is enabled)
oFF: Both click sound and determining operation
sounds are disabled.
※ Buzzer sounds when an error occurs even if you
set [bUZZ] to OFF.
③ After completing setting, press the Esc key twice to
return to the initial screen.
14
Setting the clock
key.
key.
and
key.
keys to
Advertisement
Table of Contents
