Auto Stop Operation - Yamato INE800 Manual

You can stop operation automatically with the timer in this operation mode. (When run time is
set.）
SV
Wait
Start(manual)
SV：Set temp. ｔ：Time
Setting the auto stop operation
1 Turning power on
2 Setting to the auto stop mode
3 Setting temperature
time/operation stop time
Timer start
Stop (auto)
Turn the ELB at the upper right side of the main unit
"ON". Keeping the
power on.
Main display shows the internal temperature and the
Sub display shows the set temperature.
Press the
temperature operation/auto stop on.
※ When you use the unit for the first time, fixed
temperature operation has been selected. Otherwise,
the operation mode you selected in the last session will
be selected.
and run
① Press the
TIME/CLOCK with the ▲▼ keys and then press
the
② Set time（setting range:0～99hr：59min）or clock
(24-hour format) in the Main display and then
press the
③ Set the temperature in the Sub display and then
press the
20
4. Operating procedures
ｔ
key pressed longer will turn
key to turn the lamp for fixed
key, select the method to stop from
key.
key.
key.

Auto stop operation