Specifications - Yamato INE800 Manual

Model
System
Operating temperature range *1
Temp. control accuracy（at 37℃）
*1
Temp. distribution accuracy （ at
37℃） *1
Max. temp.
Temp. attainment
time *1
Min. temp.
Temp. control system
Temp. setting system
Temp. display system
Timer
Resolution of the timer
Operating function
Additional functions
Refrigerator
Operating range of refrigerator
Refrigerator refrigerant
Material
Heater
Capacity
Blower fan
Sensor
Interior
Exterior
Heat insulator
Inner door
Safety unit
Defrosting mechanism
Cable port
Internal dimensions: Ｗ × Ｄ × Ｈ
*3
External dimensions: Ｗ×Ｄ×Ｈ
Inner capacity
Withstand load of shelf board
Number of shelf stages (pitch）
Power supply
Weight
Accessories Shelf boards/shelf
rails
Others
Optional accessories
*1 Performance has been measured at: power of AC100V; room temperature of 23℃±5℃; humidity of
65％RH±20％; and no load.
The recommended operating environmental temperature range:5℃～35℃.
*2 The refrigerator will turn OFF at a set temperature of 40.1℃ or over. If you set cooling at a constant
rate in the program run, the refrigerator will be OFF and cooling at a constant rate is disabled when
the indicated temperature is 45℃ or over and the set temperature is 40.1℃ or over.
*3 Protrusions are excluded.
±0.2℃ former JTM(continuous run at
37℃)
±0.5℃ former JTM(cycle run at 37℃)
±0.5℃ former JTM(continuous run at
37℃)
Set temp. display：5-digit amber LED digital display
Temp. display：4-digit green LED digital display
Fixed temperature operation: auto stop; auto start
Program run（Max. 99 patterns, 99 steps, repeat）
Integral time meter function, calibration offset function
External communication function (RS485), temp. output terminal（4-20mA）
Pt100Ω(temp. controller), K-thermocouple(standalone overheat preventive device)
Chrome free electrogalvanized steel plate Chemical-proof baking finish
Reinforced glass (thickness:5 ㎜; two-part of upper and lower）
Temp. sensor error, heater disconnection, SSR short-circuit, main relay error, internal
fan error, refrigerator high voltage error, refrigerator discharge gas temperature error,
inverter error, automatic overheat preventive function, key lock function, standalone
overheat preventive device, overcurrent ELB
Manual ON/auto OFF, auto defrost（time-dependent cycle or clock time）
I.D.:50 ㎜（right side of the main unit）
600×477×1000（effective size:800）mm
Stainless steel punched metal 5 boards/10 rails
External communication adaptor set(RS-485-USB conversion), external alarm
terminal, shelf board set, time-up output terminal, anti-seismic clamps (anchor bolt
hole: Φ11mm)
66

10. Specifications

INE800
Forced blow circulation
0℃～60℃
±0.3℃ JIS Temp. fluctuation
±1.0℃ JIS Temp. fluctuation (cycle run
2.0℃ JIS Temp. gradient (continuous
20℃→60℃ Approx. 35 minutes
20℃→ 0℃ Approx. 50 minutes
PID control
0min～99 hr 59min, un-limited
One minute
Rotary unit 200W
Setting 40℃ or lower ※2
R134a
350g
Iron chrome wire
750Ｗ
Axial fan
Stainless steel plate
Styrene foam (non-Freon)
710×645×1730 mm
286L
15 ㎏/board
23 （30 ㎜）
AC100V 10A（ELB: 15A）
Approx.135 ㎏
Door key x 2, silicon plug x 1
(continuous run at 37℃）
at 37℃)
run at 37℃)