Table of Contents
Advertisement
1. Be sure to connect the ground wire.
・ Be sure to connect the earth wire (green core wire of the power cord) to the earth wire or
the earth terminal to avoid an electrical shock due to earth leakage.
・ Never connect the earth wire to a gas pipe or a water pipe. Otherwise, a fire may result.
・ Never connect the earth wire to the earth terminal for a telephone line or to a lightening
conductor. Otherwise, a fire or an electrical shock may result.
・ Never use a branching outlet, which might generate heat and cause a danger.
We recommend use of a ground type outlet
tap.
ｗ
G
ground type outlet
When there is no ground terminal.
●
In this case, class D grounding work is
necessary and please consult your dealer or
our customer service center.
2. Carefully select an installation site.
● Take special care not to install the unit at a
place described below:
・ Where flammable gas or corrosive gas
exists
・ Where humidity is high
・ Where the ambient temperature is 35•℃
or more
・ Where temperature changes severely
・ Where subject to direct sunlight
・ Where vibration is severe
・ Outdoor
Install this unit at a place with spaces shown
below.
15cm or
more
How to install and preparation before operation
Ground-pole
Three-pole type power plug
with ground-pole
15cm or more
15cm or
more
1m or more
Front
2. Before operating the unit
When a bipolar type outlet tap is used
To
two-pole
type
power supply100V
W
Ground
wire
Ground adaptor
●
Insert the ground adaptor into a power plug
confirming the polarity of the outlet. Connect the
grounding wire (green) of the ground adaptor to
the ground terminal on the power supply
equipment.
3.Precautions for defrosting.
Accept water at the drain hose during
defrosting using a drain pan prepared
in advance.
Drain hose
Note: Drain pan is not included in the product.
4
Warning
Ground adoptor
Three-pole type power
plug with ground-pole
Drain pan
Advertisement
Table of Contents
