Table of Contents
Advertisement
3 Selecting a program operation
mode
4 Set the pattern number.
5 Starting a program operation
Copying/deleting a program
4. Operating procedures
Press the
key to turn the lamp for the program
operation on.
※ When you use the unit for the first time, fixed
temperature operation has been selected. Otherwise,
the operation mode you selected in the last session will
be selected.
Pressing the
key indicates [PGM:0X] on the Sub
display. Set the number of the pattern to operate using
the ▲▼ keys and then decide on it with the
Use the
keys to start the program operation.
※Note that the program operation cannot be started if
you do not set End in the final step of the program. If
operation will not start, check the program setting.
・Program copy
①
Use the
key to indicate [CoPY.P] in the Sub
display and then press the
②
When the Main display shows [SrC], input the
number of patterns as the copy source in the Sub
display and then press the
③
When the Main display shows [dESt], input the
number of patterns of the copy destination and then
press the
key.
・Deleting a program
①
Use the
key to indicate [dEL.P] in the Sub
display and then press the
②
When the Main display shows [dEL], input the
number of patterns to delete and then press the
key.
28
How to input a program
key.
key.
key.
key.
Advertisement
Table of Contents
