Fixed Temperature Operation - Yamato IN604 Instruction Manual

Fixed Temperature Operation

Start the operation from turning on the power shown in the figure, and continue the operation
under the setting temperature unless turning off the power.
SV
START
Setting of the Fixed Temperature Operation
Turn on the power
1
Select operation mode
2
▲
POWER
MENU
SV: Setting temperature
t: Time
t
▲
STOP
 Turn on the power switch of the unit (earth leakage
breaker). Pressing the POWER key turns on the
power. The Main
temperature in furnace.
indicates "Standby" and the STANDBY lamp lights
on. (Hereafter, this state is called the "standby
state".)
① Pressing the MENU key displays the operation
mode selection screen.
② The Sub Display on the operation mode selection
screen displays the name of operation mode
currently selected
corresponding operation mode lamp blinks at the
same time.
③ Keep pressing the MENU key until the fixed
temperature operation mode is displayed.
④ Press the ENTER key.
operation mode is decided.
 The fixed temperature operation is selected at the
initial setting of unit. The operation mode carried
out last is selected in case other than it.
16
Operation Method
Display indicates
The Sub Display
with blinking.
The fixed temperature
the
The