Removing And Installing Bulb For Daytime Running Light/Side Light - Volkswagen up! 2012 Workshop Manual

1.11 Removing and installing bulb for day‐
time running light/side light
Caution
Filament bulbs and gas discharge bulbs under pressure!
Danger of injury due to bursting filament lamps and gas dis‐
charge bulbs!
♦ Remove filament bulbs and gas discharge bulbs carefully.
♦ Always wear safety goggles and gloves when removing
and installing filament bulbs or gas discharge bulbs!
♦ Avoid contact with burst glass bulbs.
Note
The illustrations show removal and installation of the bulb for side
light/daytime running light on left. Removal and installation of bulb
for side light/daytime running light on right are analogous.
Removing
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Release and pull off connector -1-.
– Turn bulb holder -1- in -direction of arrow- as far as stop and
remove it together with bulb for side light/daytime running light
towards the rear and out of headlight.
Electrical system - Edition 03.2017
up! 2012 ➤
77
1. Headlights