Steering Column Switch Module; Steering Column Switch Module ► 10.2013 - Volkswagen up! 2012 Workshop Manual

7

Steering column switch module

7.1 Steering column switch module ►
10.2013
⇒ "7.1.1 Removing and installing steering column switch module
", page 95
⇒ "7.1.2 Removing and installing airbag coil connector and return
ring with slip ring F138 ", page 97
⇒ "7.1.3 Removing and installing steering angle sender G85 ",
page 98
⇒ "7.1.4 Removing and installing ignition/starter switch",
page 98
⇒ "7.1.5 Checking ignition/starter switch", page 98
⇒ "7.1.6 Removing and installing lock cylinder", page 99
⇒ "7.1.7 Removing and installing steering lock housing",
page 100
7.1.1 Removing and installing steering col‐
umn switch module
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
♦ Torque wrench - V.A.G 1783-
General description:
The following equipment-specific components are integrated into
the steering column switch:
♦ Turn signal switch - E2-
♦ Washer pump switch (automatic wash/wipe and headlight
washer system) - E44-
up! 2012 ➤
Electrical system - Edition 03.2017
7. Steering column switch module
95