Table of Contents
Advertisement
Note
If it is necessary for the wiper motor to run during the working
♦
procedure, the bonnet must be closed as otherwise the power
supply to the wiper motor will be interrupted.
The removal and installation procedure is described for left-
♦
hand drive vehicles. Removal and installation for right-hand
drive vehicles is similar.
– Move wipers to service position
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Lever off cover caps -arrows- using a screwdriver.
– Loosen nuts -arrows- a few turns.
⇒ page 41
.
Electrical system - Edition 03.2017
1. windscreen wiper system.
up! 2012 ➤
43
Advertisement
Table of Contents
