Removing And Installing Front Window Regulator Switch - Volkswagen up! 2012 Workshop Manual

♦ Mirror adjustment switch - E43-
Front passenger side:
♦ Front right window regulator switch - E41-
Note
The operating unit for window regulator in driver door - E308-
♦
must be removed before the driver side interior locking button
for central locking system - E43- and the mirror adjustment
switch - E512- can be removed or installed.
The front left window regulator switch - E40- or the front right
♦
window regulator switch - E41- can be removed without the
operating unit for window regulator in driver door - E512- hav‐
ing to be removed first.
When removing and installing components that are in view
♦
(switches, covers, trim and so on), mask off areas in which
tools ( removal wedge - VAS 3409- , screwdriver) are used to
lever out those components using commercially available
masking tape.
Removing
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Remove door panel trim on driver side ⇒ General body re‐
pairs, interior; Rep. gr. 70 ; Door trims; Assembly overview -
front door trim .
– Release catches -arrows- of operating unit for window regu‐
lator in driver door - E512- -1- using the removal wedge - VAS
3409- or a suitable screwdriver.
– Remove switch element on driver side -1- from the door trim,
beginning at the front.
Installing
Install in the reverse order of removal observing the following:
– Insert switch element on driver side -1- into the door trim, be‐
ginning at the rear -2-, and then push it in so that it latches into
place securely.
2.10 Removing and installing front window
regulator switch
Special tools and workshop equipment required
Electrical system - Edition 03.2017
up! 2012 ➤
135
2. Controls