Table of Contents
Advertisement
up! 2012 ➤
Electrical system - Edition 03.2017
– Pull bulb for side light/daytime running light -2- in a straight line
out bulb holder -1-.
Bulb for side light/daytime running light: 12V, 21/5W
Installing
Install in the reverse order of removal, observing the following:
Caution
Risk of damage to the headlight.
♦ Do not touch the glass part of the bulb with bare fingers.
Fingers leave traces of grease on the glass bulb, which
evaporate when the bulb is switched on and cause the
glass bulb to cloud over.
♦ Wear e.g. clean fabric gloves when inserting bulbs.
♦ Make sure the bulb holder is correctly seated when instal‐
ling. The ingress of water will cause permanent damage
to the headlight.
– Check functions of headlight.
– Check headlight adjustment, and readjust as necessary
"Maintenance manual" ⇒ Maintenance ; Booklet 35.1 ; De‐
scriptions of work .
78
Rep. gr.94 - Lights, bulbs, switches - exterior
Advertisement
Table of Contents
