Table of Contents
Advertisement
– Move lock carrier to service position ⇒ General body repairs,
exterior; Rep. gr. 50 ; Lock carrier; Moving to and back from
service position .
– Remove poly V-belt ⇒ Rep. gr. 13 ; Cylinder block, pulley end;
Removing and installing poly V-belt .
– Remove tensioner for poly V-belt ⇒ Rep. gr. 13 ; Cylinder
block (pulley end); Removing and installing tensioner for poly
V-belt .
Vehicles with air conditioning system
Caution
Risk of damage to air conditioner compressor, refrigerant lines
and refrigerant hoses:
♦ Do NOT stretch, kink or bend refrigerant lines and hoses.
– Remove air conditioner compressor from bracket ⇒ Heating,
air conditioning system; Rep. gr. 87 ; Air conditioner com‐
pressor; Removing air conditioner compressor from and in‐
stalling on bracket .
– Secure air conditioner compressor to lock carrier so that re‐
frigerant lines are not under tension.
Continued for all vehicles
– Unscrew the two bolts -arrows- of alternator - C- .
– Detach alternator - C- -1- and turn it over, taking into account
the lengths of attached wires.
– Release and disconnect connector -4-.
– Unscrew securing nut -3-, and detach battery positive cable
-2- from connection thread.
– Remove alternator - C- -1- by taking it downwards out of ve‐
hicle.
Installing
Install in the reverse order of removal observing the following:
Caution
♦ When fitting used poly V-belts, take note of the direction
of rotation as marked during removal!
♦ Before installing poly V-belt, ensure that all ancillaries (al‐
ternator, air conditioner compressor) are secure.
♦ When fitting belt, ensure that poly V-belt seats correctly in
pulleys!
Electrical system - Edition 03.2017
up! 2012 ➤
13
2. Alternator
Advertisement
Table of Contents
