Table of Contents
Advertisement
– Remove bulb -2- from holder -1-.
Bulb for front interior light - W1- : festoon bulb 12V, 10W
Installing
Installation is carried out in reverse order of removal.
1.5.2
Removing and installing bulbs for front
interior and reading light in vehicles with
panoramic sunroof
Special tools and workshop equipment required
♦ Removal wedge - VAS 3409-
Note
When removing and installing components that are in view
♦
(switches, covers, trim and so on), mask off areas in which
tools ( removal wedge - VAS 3409- , screwdriver) are used to
lever out those components using commercially available
masking tape.
The front interior light - W1- has to be removed in order to
♦
change its bulb.
Removing
– Switch off ignition and all electrical consumers, and pull out
ignition key.
– Remove front interior and reading light
Electrical system - Edition 03.2017
⇒ page 123
.
up! 2012 ➤
127
1. Lights
Advertisement
Table of Contents
