Machine Controls, Indicators, and Operation
3.10 STEERING
Note: When static steering is performed it will bring the engine up to high speed.
To steer the machine, the thumb operated steer control switch on the controller handle
is positioned to the right for traveling right, or to the left for traveling left. When
released, the switch will return to the center- off position and the wheels will remain in
the previously selected position. To return the wheels to the straightened position, the
switch must be activated in the opposite direction until the wheels are centered.
3.11 AUTO LEVELING JACKS
3.11.1
Leveling Jacks Operation
The machine may be equipped with auto leveling jacks with a manual adjust feature.
These leveling jacks are activated through a switch on the platform console.
Note: When leveling jacks are activated, engine speed will run at high idle.
3.11.2
Auto Leveling
1. With the platform in the stowed position, turn the power on and start machine.
2. Select the Level function on the three-position switch on the platform control
console.
3. While squeezing the trigger switch on the controller, move the controller forward
to lower the leveling jacks.
50
31221544
RT3394, RT4394