Machine Operation
If the boom is over the front (steer) axle, direction of steer and drive movement will
be opposite from the movement of the controls.
4.13 STEERING
Press footswitch. Position thumb switch on Drive/Steer controller to Right for
steering right, or to Left for steering left.
4.14 EXTENDING THE AXLES
Note: The operator must be driving the machine (forward or reverse) in order to ex-
tend the axles.
Position the Axle Extend switch to extend or retract the axles.
72
NOTICE
Figure 8. Grade and Side Slope
31222384
BM000222A
1250AJP