Communication; Accessory - JLG Toucan 8e Operation And Safety Manual

6-6 Communication

DTC FAULT MESSAGE
CANBUS FAILURE - MASTER
6632
MODULE
CANBUS FAILURE - SLAVE
6633
MODULE
CANBUS COMM LOST
6634

6-7 Accessory

DTC FAULT MESSAGE
FUNCTIONS CUTOUT - SOFT
672
TOUCH DETECTED
FUNCTIONS CUTOUT - GATE
673
OPEN DETECTED
31210162
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
DESCRIPTION
The control system failed to receive messages
from the Master Module (right controller).
The control system failed to receive messages
from the Slave Module (left controller).
The platform module failed to receive messages
from both the master and the slave modules.
DESCRIPTION
An obstacle has been detected by the soft touch
device (if equipped).
If equipped - Platform entry gate is detected open.
– JLG Lift –
CHECK
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
CHECK
• Clear the obstacle.
Refer problem to a qualified JLG mechanic.
• Check if the Gate Limit Switches are damaged,
obstructed or jammed.
Refer problem to a qualified JLG mechanic.
6-47