Verifying The Installation; Powering On The Router - HP MSR900-W Installation Manual

Figure 28 Connect the power adapter
(1) AC power cord
(3) DC power receptacle

Verifying the installation

CAUTION:
It post-installation check is important to ensure proper operation of the router.
Before powering on the router, ensure that:
There is enough space around the router for heat dissipation.
•
• The router is mounted securely on the wall or on a sturdy workbench.
Antennae, USB devices, and interface modules are installed correctly.
•
The router and power module are grounded properly.
•
• The power supply meets requirements.
The router is connected correctly to the console terminal and other devices; parameters are
•
configured correctly on the console terminal.
Before starting up the router, set up the console terminal as described in
cable and setting terminal
for the router.

Powering on the router

WARNING!
Before powering on the router, locate the power source switch so that you can cut off power promptly
in case of an emergency.
Switch on the power source
•
Turn on the power switch on the router
•
parameters." Then, power on the router and perform initial configuration
21
(2) Power adapter
"Connecting the console