Figure 24 Setting the terminal emulation parameters
Powering on the router
CAUTION:
Before powering on the router, locate the power switch in the equipment room so that you can
disconnect the power supply promptly in case of an emergency.
Before powering on the router, confirm the following:
The interface cables, power cables, and grounding cable are connected correctly.
•
The power outlet voltage is the same as indicated on the router label.
•
The console cable is correctly connected, the console terminal or PC is powered on, and the
•
terminal parameters are configured properly.
To power on the router:
Turn on the power switch of the power source providing power to the router.
1.
26