Table of Contents
Advertisement
Step
5.
Display the CAR
information on the
specified
interface.
Configuring ACL-based traffic policing
Step
1.
Enter system view.
2.
Configure an ACL.
3.
Enter interface view.
4.
Configure an ACL
based CAR policy on
the interface or port
group.
5.
Display the CAR
information on the
specified interface.
Configuring traffic policing for all traffic
Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure a CAR
action for all traffic on
the interface.
4.
Display the CAR
information on the
specified interface.
Command
display qos car interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Command
system-view
See "Configuring ACLs."
interface interface-type
interface-number
qos car { inbound | outbound } acl
[ ipv6 ] acl-number cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action ]
[ red action ]
display qos car interface
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Command
system-view
interface interface-type
interface-number
qos car { inbound | outbound } any cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ green action ] [ red
action ]
display qos car interface
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
145
Remarks
Available in any view.
Remarks
N/A
Configure rules for the ACL.
N/A
N/A
Available in any view.
Remarks
N/A
N/A
N/A
Available in any view.
Advertisement
Table of Contents
