Setting The Date And Time; Verifying Installed Licenses - HP 16Gb SAN User Manual

Brocade 16gb san switch for nl hp bladesystem c-class
Table of Contents

Advertisement

3.
Enter the user name, using the administrative account admin.
4.
Enter the password. The default password is password.
NOTE:
If you have not changed the system passwords from the default, you are prompted to change
them. Enter the new system passwords, or press Ctrl+c to skip the password prompts.
5.
Verify that the login was successful. If successful, the prompt displays the switch name and
user ID to which you are connected.

Setting the date and time

The date and time are used for logging events. The operation of the 16Gb SAN Switch does not
depend on the date and time; a switch with an incorrect date and time value functions properly.
To set the date and time using the CLI:
1.
If you have not already done so, connect to the switch and log in as admin as described in
Connect to the Command Line Interface (page
2.
Issue the date command using the following syntax:
date mmddHHMMyy
where:
mm is the month; valid values are 01 through 12.
dd is the date; valid values are 01 through 31.
HH is the hour; valid values are 00 through 23.
MM is minutes; valid values are 00 through 59.
yy is the year; valid values are 00 through 99 (values greater than 69 are interpreted
as 1970–1999, and values less than 70 are interpreted as 2000–2069).
For example:
switch:admin> date
Fri Jan 29 17:01:48 UTC 2000
switch:admin> date 0227123003
Thu Feb 27 12:30:00 UTC 2003
switch:admin>
For details about changing time zones, see the tsTimeZone command in the latest version
of the Fabric OS Command Reference Guide.

Verifying installed licenses

To determine the type of licensing included with your 16Gb SAN Switch , enter licenseshow
at the command prompt, as in the following example:
nl
switch:admin> licenseshow
nl
nl
XXXnnXXnXnnXXX:
nl
nl
Fabric Watch license
nl
nl
Release v5.0 license
nl
nl
XXXnnXXnXnnXXX:
nl
nl
Zoning license
nl
nl
XXXnnXXnXnnXXX:
nl
nl
Web license
nl
nl
XXXnnXXnXnnXXX:
nl
nl
Full Fabric
16
Setup
You can run up to two simultaneous admin sessions and four user sessions.
15).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents