General Settings Page - Extron electronics DSC 301 HD User Manual

General Settings Page

The General Settings page (see figure 50) allows the user to set a screen saver,
select HDCP notification and HDCP Mode options, set the front panel lockout mode
(Exec Mode), enable OSD Configuration information, and enable or disable auto switch. In
addition, it gives access to the
Click the General Settings icon on the global navigation bar to open the General
Settings page (see
1
2
3
4
Figure 49.
To open the Hardware Setting page, click the Hardware Settings button (
Hardware Settings page opens (see figure 50) with the unit information including Part
Number, Model Name, Model Description, Firmware Version, Temperature, and
Device Name.
Figure 50.
To set the Screen Saver , click the desired radio button (black or blue with an OSD
bug, see figure 49,
set the duration in seconds (0-500). To do this, either enter a new value in the field or
click on the up or down arrows to increase or decrease the time duration. Then, press the
<Enter> or <Tab> key to apply the changes.
To set HDCP Notification , click the desired radio button (Black or Green,
To set the OSD (On-Screen Display) Configuration Menu, select the checkbox (
set the duration in seconds (0-500) to determine the time allotment for an OSD message
to display on the screen.
Hardware Settings
figure 35, , on page 49).
7
General Settings Page
Hardware Settings Page
). To disable sync after a specified time, select the checkbox, and
2
DSC 301 HD • Product Configuration Software
page.
5
6
7
). The
1
).
3
), and
4
63