Table of Contents
Advertisement
Quick Setup submenu
This submenu (see figure 4) allows you to make basic configuration adjustments to the
DSC 301 HD.
1
2
3
4
5
6
7
Figure 4.
OSD Menu — Quick Setup Submenu
The configurable variables are:
Auto-Image — Select this option (
input.
INx: Input Format — Select this option (
NOTES:
INx refers to the selected input, for example, Input 2, as shown in figure 3.
•
•
View only for inputs 1 (composite video) and 3 (HDMI), selectable for input 2
(RGB or YUV).
IN2: EDID — Select this option (
(see the
Resolutions and Refresh Rates table
IN3: EDID — Select this option (
(see the
Resolutions and Refresh Rates table
Output Resolution — Select this (
output. There are a number of factory installed output resolutions and rates, plus three
custom user defined blocks (see the
Audio Mute — Select this option (
Test Pattern — Select this option (
up the DSC 301 HD and the corresponding output display. Available patterns are: Off (no
test pattern), Crop, Alternating Pixels, Color Bars, Gray Scale, Blue Mode, and
Audio Test (pink noise).
) to start a one-time Auto-Image on the current
1
) to change the input format.
2
) to match the output rate or to set a discrete EDID
3
on page 20 on page 20 for EDID data).
) to match the output rate or to set a discrete EDID
4
for EDID data).
) to set the resolution and refresh rate for the
5
presets table
on the next page for details).
) to turn the audio mute option on or off.
6
) to choose a suitable test pattern when setting
7
DSC 301 HD • Operation
10
Advertisement
Table of Contents
