Table of Contents
Advertisement
AV Input Buttons
Click an AV Input button (1 through 3) to select that input (see
previous page). As the new input is selected, the summary within the panel changes to
reflect the new input and output status.
NOTE: The signal status indicators on the AV input buttons display green when
Auto-Image button
Click the Auto-Image button (
Freeze button
Click the Freeze button (
input. When the button is blue the image is frozen. Click the button again to unfreeze the
image.
Audio, Video, AV, and Sync Mute buttons
•
•
•
•
To unmute any signal, click the appropriate button. The button reverts to the default color,
indicating the signal has been unmuted.
Configuration Pages
The configuration pages contain options for input and output configuration, EDID
management, image settings, image size and position, audio configuration, preset
management, and general settings. Each page is accessible via the global navigation bar
(see figure 35).
1
2
Figure 35.
a signal is present on the corresponding input or gray when there is no signal
present.
2
) to freeze the current displayed video frame for the selected
3
Click the Audio Mute button (
red.
Click the Video Mute button (
Click the AV Mute button (
6
button turns red, along with the Video Mute and Audio Mute buttons.
Click the Sync Mute button (
3
4
Global Navigation Bar
) to start a one-time Auto-Image on the selected input.
) to globally mute only the audio. The button turns
4
) to mute only the video signal. The button turns red
5
) to mute both video and audio simultaneously. The
) to mute video and sync. The button turns red.
7
5
6
DSC 301 HD • Product Configuration Software
figure
34,
on the
1
7
50
Advertisement
Table of Contents
