Extron electronics DSC 301 HD User Manual page 26

Digital scaling converter

Hide thumbs Also See for DSC 301 HD:

Table of Contents

Factory Reset — This option (see

figure

11,

on page 16) resets the device back to

factory defaults (retains current firmware).

NOTE: FACTORY RESET is displayed on the OSD for 1 minute after the reset to allow

time for the display device to sync with the DSC 301 HD output.

To reset the DSC 301 HD to factory setting, including original shipped firmware, press

and hold the Enter button for 20 seconds while applying power. The message FIRMWARE

RESET is displayed on the OSD to indicate the reset is completed.

When a firmware reset is applied, the loaded current firmware is deleted and only the

factory firmware remains on the device.

Communication submenu

This read-only submenu allows the remote port settings for the unit to be viewed. No

adjustment is possible via the OSD menu (see figure 13).

Figure 13.

OSD Menu — Communication Submenu

DSC 301 HD • Operation

Table of Contents