Extron electronics DSC 301 HD User Manual page 67

Input Presets
An input preset is a user-defined set of input and picture control settings that can be
saved for each source within a system so that they can be recalled whenever the source
is applied (see figure 45,
1
that was applied when the preset was initially saved.
This type of preset saves specific settings for size, centering, contrast, brightness, color
and tint (if applicable), detail, and input configuration.
NOTE: An input preset can be recalled on any input supporting the input type that
was active when the preset was saved.
To save an input preset:
From the Input Presets list, (
1.
2. Click the Save Preset button (
information on it, the Presets dialog box opens. Click the Overwrite button to
erase the previous data and save the new settings. Click the Cancel button to return
to the Image Settings page.
To rename a preset:
In the Input Preset Name column, double-click an Input Preset Name.
1.
2. Change the name as desired.
3. Press the <Enter> key to save the new name.
To recall an input preset:
1. From the Input Presets list, select the desired preset.
2. Click the Recall Preset button (
3.
Click the Recall button to recall the preset. Click the Cancel button to return to the
page.
Image Settings
To clear a preset:
1. From the Input Presets list (see (
2. Click the Clear button (
3.
Click the Clear button to erase saved data. Click the Cancel button to return to the
Image Settings page (see
User Presets
There are three user presets per input to save picture control settings only (see
).
5
To save a user preset:
From the User Presets list (
1.
2. Click the Save Preset button (
information on it, the Presets dialog box opens. Click the Overwrite button to
erase the previous data and save the new settings. Click the Cancel button to return
to the Image Settings page (see
To rename a preset:
In the User Preset Name column, double-click a User Preset Name (see
1.
).
5
2. Change the name as desired.
3. Press the <Enter> key to save the new name.
on the previous page). Input presets are unique to the signal
) select the desired preset.
1
). If the selected preset already has stored
2
). The
Presets
3
) select the desired preset.
1
). The Presets dialog box opens.
4
figure 41 on page 56).
), select the desired preset.
5
). If the selected preset already has stored
6
figure 41).
DSC 301 HD • Product Configuration Software
dialog box opens.
figure
figure
45,
45,
59