Table of Contents
Advertisement
HDCP Authorized
Select the HDCP Authorized checkbox (see
enable or disable the HDCP Authorized feature for input 3. This feature determines if a
digital input reports as an HDCP authorized sink to a source.
NOTE: This option is not available for analog inputs 1 and 2.
For source devices that require encryption, enable HDCP Authorized. If HDCP
Authorized is disabled for sources that require encryption (for example, a Blu-ray player),
the output is muted or a warning message is displayed.
Some source devices may encrypt their output even if the source material does not
require HDCP encryption, preventing content from being displayed on a non-HDCP
compliant display. Disable HDCP Authorized to allow the output of the scaler to remain
unencrypted.
Film Detect
Select the Film Detect checkbox (
and 24:1 film pulldown detection for NTSC, PAL, SECAM, and 1080i input signals.
Output Configuration panel
The Output Configuration panel (see figure 37) contains controls for output
resolution and rate, output format settings, switch transitions, Accu-RATE frame lock
(AFL) settings, and available test pattern selection.
1
2
3
4
5
6
Figure 37.
Output Configuration
Resolution
From the Resolution drop-down list, select the applicable output resolution (
setting is 720p/60 Hz. The selectable resolutions include three user customizable slots:
C1-C3.
Refresh rate
From the Refresh Rate drop-down list, select the applicable output refresh rate (
figure
36,
on the previous page) to
5
) of the desired input to enable automatic 3:2, 2:2,
6
DSC 301 HD • Product Configuration Software
). Default
1
).
2
52
Advertisement
Table of Contents
