Table of Contents
Advertisement
Exit
This option disconnects PCS from connected devices and closes the application.
1.
2.
AV Controls Panel
The AV Controls panel (see figure 34) can be used to switch inputs, view active input
and output status, initiate an Auto-image, freeze the displayed image, and mute or
unmute video and audio signals.
Included in the panel is a summary of the current active input and output status, including
signal format and HDCP status, as well as AFL status.
NOTE: This panel can be hidden or revealed on any page by clicking on the arrow
2
4
6
Figure 34.
NOTE: An open lock icon indicates that an input or output is not HDCP-encrypted.
From the Software menu, select Exit (see
tabs are open, the Exit dialog box opens (see figure 33).
Figure 33.
Exit Dialog Box
If necessary, click the Close Session(s) and Exit button (
software from connected devices, close all offline device tabs, and close the software.
Click the Cancel button to leave the software open.
button on the top right of the panel.
1
3
5
7
AV Controls Panel
A closed lock with a check mark icon indicates that an input or output is HDCP-
encrypted.
figure
29,
, on page 47). If device
7
1
DSC 301 HD • Product Configuration Software
) to disconnect the
1
49
Advertisement
Table of Contents
