Table of Contents
Advertisement
Output format
From the Output Format drop-down list (see
previous page) select the applicable digital signal format (see the image
at right for format selection).
The default setting is Auto. This setting detects the display device
capabilities and outputs DVI RGB 444 for DVI sinks, or HDMI RGB 444
Full for HDMI sinks.
Switch transitions
In the Switch Transitions panel (
•
Fade Through Black
newly selected video.
•
— Switches video directly to the newly selected input.
Cut
Accu-RATE frame lock (AFL)
From the Accu-RATE Frame Lock section (
buttons:
•
Off
— Frame lock is disabled.
•
— Frame lock is enabled.
Input AFL
NOTE: AFL is a patented technology exclusive to Extron that locks the output frame
rate to a designated input to eliminate stuttering caused by frame rate conversion.
Test patterns
To aid display device setup and optimization, select a test pattern from the drop-down list
(
) under the preview window.
6
COLOR BARS (8)
ALT PIXELS
AUDIO TEST (PINK NOISE)
Figure 38.
Available Test Patterns
NOTE: No input signal is needed when using a test pattern for display device setup.
figure
37,
), select one of the following radio buttons:
4
— Fades video to a black screen before switching to the
), select one of the following radio
5
CROP
GRAYSCALE
AUDIO TEST
DSC 301 HD • Product Configuration Software
on the
3
CROSSH TCH
A
BLUE MODE
53
Advertisement
Table of Contents
