Command
ASCII Command
(Host to Scaler)
Output Configuration, continued
Screen Saver Mode (action that takes place when no signal is detected on the selected input)
Set mode
EMX2%SSAV}
View mode
EMSSAV}
Set sync time out
ETX2!SSAV}
duration
View sync time
ETSSAV}
out duration
View screen
ESSSAV}
saver status
Audio Configuration
Audio Mute (global setting)
Mute on
1Z
Mute off
0Z
View status
Z
Audio Gain and Attenuation (per analog input)
Set gain and
X3#G
attenuation
Increment
+G
-G
Decrement
G
View
Audio Input Format
NOTES:
•
Selects between analog (3.5 mm TRS) or digital (embedded in HDMI input) audio sources.
•
Inputs 1 and 2
X3$
error response.
•
Digital auto modes (6 or 7) detect and use embedded audio when present, or use TRS 3 if digital audio is not
detected
Set None
EIX!*0AFMT}
Set Analog TRS 1
EIX!*1AFMT}
X! = Input selection: 1 = composite, 2 = RGB.YUV, and 3 = HDMI
KEY:
X( = Enable or disable: 0 = Off or disable, 1 = On or enable
X2! = On-screen menu timeout: (default = 60 seconds), output sync timeout (default = 501 - never)
0 = OSD never displayed or output sync is instantly disabled with no active input, 1 to 500, in 1 second
increments, 501 = OSD never times out/output sync never times out
X2% = Screen saver mode: 1 = Black screen (default), 2 = Blue screen with OSD text
X3# = Audio gain and attenuation: -18 through + 12 dB, (with leading "+" or "–")
X3$ = Audio Input type:
0 = None, 1 = Analog TRS 1, 2 = Analog TRS 2, 3 = Analog TRS 3, 4 = LPCM-2Ch, 5 = Multi-Ch,
6 = LPCM-2Ch Auto, 7 = Multi-Ch Auto. See the
X3& = Screen saver status:
0 = Active input detected, timer is not running. 1 = No active input, timer is running, output sync is still active.
2 = No active input, timer has expired, output sync is disabled.
can be set only to 0, 1, 2, or 3. Attempting to set these inputs to a digital format yields an E14
Response
(Scaler to Host)
SsavMX2%]
X2%]
SsavTX2!]
X2!]
X3&]
Amt1]
Amt0]
X(]
AudX3#]
AudX3#]
AudX3#]
X3#]
AfmtIX!*0]
AfmtIX!*1]
command description
on page 26 for variable details.
DSC 301 HD • SIS Communication and Control
Additional Description
Sets the screen saver mode to
(default: 1 = black)
X2%
View the current screen saver
mode.
Sets sync time out duration to
seconds (default: 501 = never).
View sync time out duration X2!.
View the screen saver status X3&.
Mute audio output.
Unmute audio output.
View mute status.
Set gain and attenuation on
current input to X3# dB.
Increment audio level (up).
Decrement audio level (down).
View current audio level.
Mutes all audio for input X!.
Select analog audio for input X!
(default for input 1).
X2!
34