Image Settings Page - Extron electronics IN1606 series User Manual

Image Settings Page

The
Image Settings
recalls user and input presets, and applies overscan settings. Click the
icon (see figure
settings
Figure 63.
Signal Sampling panel
Signal sampling optimizes the input signal to the scaler for the currently selected input.
Figure 64.
To manually adjust signal sampling settings, enter a value within the Min and Max values
displayed to the right of each adjustable setting (see figure 64,
arrows. An asterisk beside a chosen value for a signal sampling setting indicates that it is a
default value for the applied video signal (for example, see Active Lines in figure 64).
To automatically adjust these settings, perform one of the following:
• Click the
• Click the
the entire video output (ignores aspect ratio setting).
• Click the
maintain the aspect ratio of the input signal (ignores aspect ratio setting).
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
page adjusts signal sampling and picture control settings, saves and
58, on page 86) on the
4
page.
Image Settings Page
Signal Sampling Panel
button ( ) to perform a one-time Auto-Image.
2
Auto-Image
button (
Auto-Image & Fill
Auto-Image & Follow
Global Navigation Bar
1
) to perform a one-time Auto-Image and fill
3
button ( ) to perform a one-time Auto-Image and to
4
Image Settings
to open the
Image
) or click the or
Up Down
91