Table of Contents
Advertisement
Input x: Gain/Attenuation — Select this option (see
page) to set the gain and attenuation for analog audio inputs (the range is -18 dB to
+12 dB).
NOTE: For analog inputs TRS1, TRS2, and TRS3, or for digital auto modes only
Example of audio setup using an Extron Cable Cubby
•
The Extron Cable Cubby has three video inputs (composite, RGB, and HDMI) that are
connected to the DSC 301 HD, inputs 1 through 3.
•
A single 3.5 mm TRS audio cable is connected to the analog TRS 3 input on the
DSC 301 HD.
Configure input 1 and input 2 to use audio from the analog TRS 3 input.
•
•
Configure input 3 to LPCM-2Ch Auto to use digital audio when present, or when not
present, to use analog TRS 3.
Advanced submenu
This submenu allows you to configure the global settings for the unit (see figure 11).
1
2
3
4
5
6
7
8
Figure 11.
OSD Menu — Advanced Submenu
Test Pattern — Select this option (
system and checking the display device. Test pattern options are:
COLOR BARS (8)
ALT PIXELS
Figure 12.
Test Pattern Options
) to use a test pattern during the setup of the
1
CROSSH TCH
CROP
GRAYSCALE
BLUE MODE
figure
10,
on the previous
3
A
AUDIO TEST
DSC 301 HD • Operation
16
Advertisement
Table of Contents
